# Brownian Control and the Test

**URL:** <http://discourse.iapct.org/t/brownian-control-and-the-test/1980>\
**Category:** CSG1996\
**Created:** [February 22, 1996, 2:03pm UTC](http://discourse.iapct.org/t/brownian-control-and-the-test/1980 "1996-02-22T14:03:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![HANS\_BLOM2](http://discourse.iapct.org/letter_avatar_proxy/v4/letter/h/f17d59/32.png) [@HANS\_BLOM2](http://discourse.iapct.org/u/HANS_BLOM2)\
**Post date:** [February 22, 1996, 2:03pm UTC](http://discourse.iapct.org/t/brownian-control-and-the-test/1980/1 "1996-02-22T14:03:51Z")

</div>

[Hans Blom, 960222c]

(Bill Powers (960220.1130 MST))

> Your proposed [Brownian] control system makes r depend on d. You  
> don't mention any reference level for d, but I presume there is one  
> in your simulation (even if it's just zero). The reference level of  
> d is defined for your situation as that value of d at which there is  
> no tendency to increase or decrease r.

No, I didn't set my system up as a control system. I did the  
following:

1. define the chemical's concentration c as position dependent:  
&nbsp;&nbsp;&nbsp;c = f (x, y) if in two-space

2. define the particle's radius as concentration dependent:  
&nbsp;&nbsp;&nbsp;r = g (c)

3. compute the particle's next position change d based on Einstein's  
&nbsp;&nbsp;&nbsp;formula: d = k / sqrt (r) with a suitably chosen k; note that this  
&nbsp;&nbsp;&nbsp;disregards that in Einstein's formula d is an \_average\_ value  
&nbsp;&nbsp;&nbsp;only; since I do not know d's probability density function, I  
&nbsp;&nbsp;&nbsp;cannot simulate how it would vary

4. make the particle move a distance d in a randomly chosen direction  
&nbsp;&nbsp;&nbsp;yielding new x and y coordinates.

5. loop to 1.

My observations showed that the simulated particle's movements depend  
upon the choice of the functions f and g. In particular, if f is  
constant (no concentration gradient) or if g is constant (no change  
of the particle's radius) we have the standard Brownian movement. But  
with suitably chosen f and g we observe that the particle's position  
tends to remain in the vicinity of the maximum concentration. This  
led me to the hypothesis that we might have something resembling a  
control system here, where the particle's radius functions both as  
the sensor \_and\_ as the actuator. Kind of funny, maybe, and certainly  
different from the standard control setups that we normally consider.  
On the other hand, the explanation might be that the particle cannot  
escape from a gravitation-like "field", which would indicate that we  
have an equilibrium system. Now, which is the "better" explanation?

I didn't program a control system; I iterated a number of (more or  
less realistic) physics-like equations in order to see what kind of  
movement ("behavior") would result for the particle.

> So basically we want to see if the partial derivative of (d^2) with  
> respect to T is less when your control system is acting than when it  
> is not acting. And of course it is of interest to see \_how much  
> less\_ the effect is when control is present.

This statement indicates that the description of my experiment was  
unclear. Sorry. In my simulation, I cannot discriminate between "a  
control system acting" or not, because the simulation wasn't set up  
that way. I hope the above makes clearer why I cannot do The Test as  
you propose it.

Greetings,

Hans

> **···**
>
> ================================================================  
> Eindhoven University of Technology Eindhoven, the Netherlands  
> Dept. of Electrical Engineering Medical Engineering Group  
> email: j.a.blom@ele.tue.nl
> 
> Great man achieves harmony by maintaining differences; small man  
> achieves harmony by maintaining the commonality. Confucius
